Toshiba TOSVERT VF-AS1 Instruction Manual page 11

(B) For VFAS1/VFPS1 200V 55kW or more, 400V 90kW or more
a) Insert a flat-blade screwdriver in each of the two holes at the upper part of the front panel,
release the panel mounting tab by pushing the screwdriver down, and remove the front panel
cover.
b) Push the hooks pointed by the arrows and remove the standard option case.
c) Install the option in the inverter by fitting the tabs on the lower side of the option into the slots
at the lower part of the inverter front panel. *1
d) Make sure the option is securely attached to the inverter. Then, check whether the plastic
bosses on the inverter case have fitted in the holes at the upper and lower parts of the
option.
e) Insert the tabs at the lower part of the front cover into the slots at the lower part of the
inverter to attach the front cover to the inverter. *1
f) Stuck the enclosed "LED name label" on the option LED display part of a front cover.
*1 Do not bend the connector pins when you install the option card and panel.
a-1)
a-3)
Detach the front cover
c)
Attach the option
Connecter pins
d)
－ １０ －
a-2)
b)
Detach the standard option case
e)
Attach the front cover
E6581476②
Connecter pins