Language J; Anti-Crease; Buzzer; Time Of Day - Miele PT 7136 Plus Operating And Installation Instruction

Settings menu J

Language J

The display can be set to appear in
one of several different languages.
To select the language you want, go to
the Languages J sub-menu.
^ If the language shown is not the one
you want turn the multi-function
selector to highlight the one that you
do want and confirm your selection.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The different language setting will only
apply to the programme currently in
use. After the programme has finished
the display will revert to the default
language which was set in the
Settings/Supervisor level menu.
If after setting a new language no
further entries are made for approx. 15
seconds the display will revert to the
previously set language.

Anti-crease

At the end of the programme the
drum will continue to rotate at
intervals for one hour to prevent
laundry creasing, if you do not wish
to remove it immediately.
The machine is delivered with this
option set at: On.

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of a programme.
52
Off
The machine is delivered with the
buzzer deactivated.
The buzzer will still sound if there is a
fault even if it has been deactivated.
Normal
The buzzer sounds at the end of a
programme.
Loud
The buzzer sounds at maximum volume
at the end of a programme.

Time of day

First select whether you want the
clock displayed as a 24 hour or 12
hour clock, or to not display it at all.
Then set the current time of day.
If you select to not display the clock,
the Timer can only be used to delay the
start by up to 24 hours, i.e. it will show
how many hours until the start but not
the current time of day.
To select a 24 hour or 12 hour clock
^ Select the clock option you want and
confirm your selection.
The display will then change to the
screen for setting the time (of day).
Set the time of day
^ Use the multi-function selector to
select the hour and confirm your
selection. Now set the minutes.
Pressing the multi-function selector
again saves the time (of day) in
memory.