Table of Contents
Advertisement
Installation and connection
Installation site
,
Make sure the dryer door can be
opened without hindrance after
installation.
Transporting the machine to its
installation site
When moving the machine, you can
hold it by the lid where it protrudes to
the rear of the dryer.
To manoeuvre the dryer out of its
packing case to its installation site, you
will also need to hold it by the front feet.
Levelling the machine
The machine must be perfectly level to
ensure safe and proper operation.
40
^ The screw feet can be adjusted to
compensate for any unevenness in
the floor.
,
A ventilation gap of 10 mm must
be maintained between the base of
the machine and the floor. It must
not be blocked by deep pile
carpets, plinths, etc, which would
prevent a sufficient intake of cold air.
This tumble dryer is not suitable for
building under.
Hide quick links:
Advertisement
Table of Contents
