Replacing The Filter; Cleaning The Tumble Dryer - Miele PT 7136 Plus Operating And Installation Instruction

Hide thumbs Also See for PT 7136 Plus:
Table of Contents

Advertisement

^ Replace the covers in the door
opening by first inserting them at the
bottom and then pressing them into
place at the top.
^ Turn both catches shut (you will hear
them click).
The fan behind the filter can become
clogged with detergent residues and
fluff.
^ Using a damp cloth, carefully clean
. . . any residues on the fan
. . . the fluff from around the fan
. . . the fluff from inside the access
panel. Take care not to damage the
rubber seal.

Replacing the filter

^ Reassemble the inner and outer
sections of the filter.
^ Slowly turn the inner section of the
filter clockwise until it you hear it
click.
Cleaning and care
^ Holding the filter by the handle, push
it into its housing as far as it will go.
The handle on the inner section of the
filter can be turned to enable the filter
to be replaced and removed
comfortably.
^ Close the access panel.

Cleaning the tumble dryer

,
Disconnect the machine from the
mains electricity supply.
,
Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaners. These could
damage plastic surfaces and other
parts.
,
The machine must never be
hosed down.
^ Clean the housing and the control
panel with a slightly damp cloth and
a mild detergent or soapy water.
^ The drum and other stainless steel
parts can be cleaned with a suitable
proprietary stainless steel cleaner
following the manufacturer's
instructions.
^ Dry all parts with a soft cloth.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
wuch as stainless steel, glass, plastic
and chrome without the use of
chemicals. It can be washed 300 times.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents