Connect Speaker Cables - Philips AW9000 User Manual

3
On the initial Setup page, tap Setup a new
speaker.
4
Read the general setup steps, then tap
Next.

Connect speaker cables

Note
•
Insert the stripped portion of each speaker wire into
the socket completely.
•
For optimal sound, use the supplied speakers only.
1
Unscrew the speaker connectors.
2
Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3
Screw the left red (+) connector to secure
the cable.
4
Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
1 2 3
EN 7