Connect Power And Switch On - Philips AW9000 User Manual

Connect power and switch
on
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the device.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, make sure that
you have completed all the other connections.
1
Read the power connection instructions
on the app.
2
Connect the AC power cord to
the AC IN ~ socket on the back of the
•
main speaker.
• the wall power socket.
» The device switches on automatically.
» The power/status indicator blinks
amber during boot-up.
» After a while, for first-time setup, the
power/status indicator turns solid
amber.
EN
8
3
Tap Next on the app screen to continue.
Switch between normal and Eco power
standby mode
• To switch the device to normal standby
mode, briefly press the power button/
indicator above .
» The power/status indicator turns green.
• To switch the device to Eco power standby
mode, press and hold the power button/
indicator above
and then release the button.
» The power/status indicator turns
amber for a short while and then turns
off.
• To switch the device on from normal or
Eco power standby mode, briefly press the
power button/indicator above
Operation
On -> Briefly press the
Normal power button/indi-
standby cator above .
On/Normal Press and hold the
standby -> power button/indi-
Eco power cator above
standby less than 3 seconds
and then release
the button.
Normal Briefly press the
standby/ power button/
indicator above .
Eco power
standby ->
On
for less than 3 seconds
again.
LED status
Amber/white
-> Green
Amber/white
or green ->
for Off
Green/Off ->
Amber/white