Connect Aw9000 To Your Home Wi-Fi Network; Option 1: Set Up Wireless Connection To A Non-Wps Router Through An Ios Device - Philips AW9000 User Manual

4 Connect AW9000
to your home Wi-
Fi network
To connect AW9000 to your existing home Wi-
Fi network, you need to apply your home Wi-Fi
settings to AW9000.
Choose your best setup method based on the
preconditions listed below.
Platform Type Other
of your of your re-
mobile Wi-Fi quire-
device router ment
iOS Non-WPS No
Android Non-WPS No
Either WPS No
iOS or
Android
Either Either You
iOS or non- have an
Android WPS or Eth-
WPS ernet
cable.
Setup method
Choose option
1 (see 'Option 1:
Set up wireless
connection to a
non-WPS router
through an iOS
device' on page
9).
Choose option
2 (see 'Option 2:
Set up through
a non-WPS
Wi-Fi router and
Android device'
on page 12).
Choose option
3 (see 'Option 3:
Set up wireless
connection to a
WPS router' on
page 14).
Choose option
4 (see 'Op-
tion 4: Set up
wired connec-
tion through an
Ethernet cable'
on page 16).
Before connection of AW9000 to your home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b AW9000 has been powered on and
booted up successfully (see 'Connect
power and switch on' on page 8).
c you have jotted down your Wi-Fi
password.
Once connected successfully, AW9000 will
remember your home Wi-Fi settings. Then you
can play music or listen to Internet radio via
Philips AirStudio+ Lite whenever AW9000 is
powered on and connected to your home Wi-
Fi network automatically.
Option 1: Set up wireless
connection to a non-WPS
router through an iOS device
1
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
2
Select Standard SETUP and tap Next.
EN 9