Upgrade Firmware - Philips AW9000 User Manual

6 Upgrade
firmware
To improve the performance of AW9000,
Philips may offer you new firmware for upgrade
of your AW9000.
Warning
•
Always connect your AW9000 to AC power for
firmware upgrade. Never power off your AW9000
during firmware upgrade.
1
Make sure that AW9000 is powered on
and connected to the same Wi-Fi network
as your smartphone or tablet.
2
Make sure that your home Wi-Fi network
is connected to the Internet.
3
Run Philips AirStudio+ Lite on your iOS
or Android smartphone or tablet.
4
Tap Services -> Device settings.
5
Tap Check online.
» If a new firmware is available. A
firmware upgrade prompt pops up
automatically.
6
Tap OK on the prompt message to start
firmware upgrade.
» The power/status indicator on
AW9000 flashes amber during this
process.
7
Wait until the firmware upgrade process
finishes, then tap OK on the prompt
message to restart the device.
EN 21