User manual EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips Customer Care Center at 1-866-310-0744 • To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989;...
Contents 1 Important Help and support Important safety instructions Care for your product Care of the environment 2 Your SoundBar Main unit Remote control Connectors 3 Connect and set up Placement Connect to TV Connect audio from TV and other devices 7 4 Use your SoundBar Adjust the volume Choose your sound...
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult For extensive online support, visit www.philips. an electrician for replacement of the com/support to: obsolete outlet.
CAUTION: To prevent electric shock, match or www.recycle.philips.com. wide blade of plug to wide slot, fully insert. • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
2 Your SoundBar Care for your product Use only microfiber cloth to clean the product. Congratulations on your purchase, and welcome to Philips! To fully benefit from Care of the environment the support that Philips offers, register your SoundBar at www.philips.com/welcome.
(Play/Pause) • Start, pause or resume play in USB mode. e BASS +/- Increase or decrease bass. f Volume control +/-: Increase or decrease volume. • • : Mute or restore volume. g SOUND Select a sound mode. h SURROUND ON/OFF Select surround or stereo sound.
3 Connect and set a DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. b AUX IN (L/R) Connect to an analog audio output on the TV or an analog device. This section helps you connect your SoundBar to a TV and other devices, and then set it up.
Connect to TV Connect audio from TV and other devices Connect your SoundBar to a TV. You can listen to audio from TV programs through your Play audio from TV or other devices through SoundBar. Use the best quality connection your Soundbar speakers.
4 Use your Option 2: Connect audio through a digital coaxial cable SoundBar Good quality audio This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual.
On the Bluetooth device, switch on Equalizer Bluetooth, search for and select PHILIPS HTL2163B to start connection (see the Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. user manual of the Bluetooth device on how to enable Bluetooth).
Press USB on the remote control. To exit Bluetooth, select other source. • When your switch back to Bluetooth Use the remote control to control play. mode, Bluetooth connection remains active. Button Action Start, pause or resume play. Skip to the previous or next track. Note During USB play, press repeatedly to •...
In HDMI ARC source mode, press TREBLE -, BASS - and - (Volume) on the remote control. Update software via USB Check the latest software version on www. philips.com/support. • Search for your model and click on "Software and drivers".
6 Wall mount » If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the Note USB storage device. • Press to start the update. Improper wall mounting may result in accident, injury or damage.
Bluetooth version: 3.0 + EDR Main unit Amplifier • Power supply: • FTC total output power: 40W • Model (Philips branded AC power • Left + Right: 25W (1%THD, 8ohm, adapter): DYS602-210309W; AS650- 120Hz-20kHz) 210-AA309 • Subwoofer: 15W (1%THD, 4ohm, •...
If you still have a problem, get support at www. SoundBar. philips.com/support. • You have not enabled the Bluetooth function of the device. See the user manual Main unit of the device on how to enable the function.
WOOX Innovations may void the user’s 15. Operation is subject to the following two authority to operate the equipment. conditions: Model number: PHILIPS HTL2163B/F7 a This device may not cause harmful Trade Name: Philips interference, and Responsible Party:P&F USA, Inc. PO Box 2248 Alpharetta, GA 30023-2248;...
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD- to it. This Limited Warranty does not apply to any non-Philips UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE hardware product or any software, even if packaged or sold LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR with the product.
WOOX Innovations, and is the manufacturer of the product. P&F is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.