Upgrade Firmware - Philips SW750M User Manual

Upgrade firmware

To improve the performance of SW750M,
Philips may offer you new firmware for upgrade
of your SW750M.
Warning
•
Always connect your SW750M to AC power for
firmware upgrade. Never power off your SW750M nor
close the app during firmware upgrade.
1
Make sure that SW750M is powered on
and connected to the same Wi-Fi network
as your smartphone or tablet.
2
Make sure that your home Wi-Fi network
is connected to the Internet.
3
Run SpeakerSet on your iOS or Android
smartphone or tablet.
4
Tap the speaker image to see options
available for the speaker.
20 EN
5
Tap Firmwareupgrade to enter the
firmware upgrade page.
6
Tap Check online to see whether any new
version of firmware is available.
7
If a new version is available, tap Update to
start firmware upgrade.
» The system status indicator on the
front panel blinks amber and red
alternately during this process.
8
Wait until the firmware upgrade process
finishes, then tap OK to reboot the
speaker.
Tip
•
Depending on the network connection, it may take 10
minutes to finish upgrade.