Using The Plate Warmer; Cycle Status Indicatrs - GE GLD8000 Series Owner's Manual

English
NOTE: To cancel the delay and the cycle, press CANCEL . To cancel the delay and start the
cycle immediately, press DELAY START until no hours show in the display.

USING THE PLATE WARMER

Use the PLATE WARMER option to warm serving dishes or dinner plates.
NOTE: Do not use the option with cycles.
CYCLE STATUS INDICATORS
Follow the progress of your dishwasher with the Cycle Status Indicators .
NOTE: Some models do not have certain cycle status indicators.
Water Heated
Water heated glows only when the cycle pauses to heat water to a set temperature.
Washing or rinsing continues as water is heated. Once water reaches the set temperature,
the light goes off and the cycle resumes.
Washing
Displayed during pre-wash and main wash periods.
Turbidity Sensor
Sensor glows during the sensing part of the cycle. Your dishwasher senses soil level at the
end of the pre-wash. Washing continues while sensing occurs.
Rinsing
Displayed during rinse periods.
21
To Delay The Start
1. Close the door.
2. Repeatedly press DELAY START until you see the desired hours of
delay in the display.
When the delay reaches 12 hours (or 24 hours on integrated
control models), the delay turns off. Press DELAY START again to
select a new number of delay hours.
3. Select a wash cycle and options.
(on some models)
1. Open the door.
2. Press PLATE WARMER , it glows.
3. Allow 8 minutes to heat the dishware.