Before Using Your Dishwasher - GE GLD8000 Series Owner's Manual

Hide thumbs Also See for GLD8000 Series:
Table of Contents

Advertisement

Available languages

Available languages

English
SAFETY PRECAUTIONS
• Do not use dishwasher until completely installed.
• Do not push down an open door; Doing so can result in
serious injury or cuts.
• Electrically ground dishwasher.
• Connect ground wire to green ground connector in terminal box.
• Do not use an extension cord.
• Dishwasher must be supplied with 120V 60 Hz, and connected to
an individual, properly grounded branch circuit protected by a
15 amp circuit.
• Failure to follow these instructions can result in death, fire or
elctrical shock.
This dishwasher must be properly installed and located in accordance with the
Installation Instructions before it is used. If you did not receive installation
instructions with your dishwasher, you can obtain them by visiting our Website at
www.geappliances.ca.
• Install where dishwasher is protected from the elements. Protect against freezing to
avoid possible rupture of fill valve. Such ruptures are not covered by the warranty. See
"Storing" in the "Dishwasher Care" section for winter storage information.
• Install and level dishwasher on a floor that will hold the weight and in an area suitable
for its size and use.
• Remove all shipping plugs from hoses and connectors (such as the cap on the drain
outlet) before installing. See Installation Instructions for complete information.
3
WARNING
Tip Over Hazard
WARNING
Electrical Shock Hazard

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gld9000 series

Table of Contents