Download  Print this page

Ol>Erating; Plate Warmer; P()'I"S; How To Operate Your Dishwasher - GE GSC470 Use And Care Manual

Convertible
Hide thumbs

Advertisement

Table of Contents

How to operate your dishwasher

(
Before using your dishwasher the
first time, install the faucet adapter
according to instructions on page
12. This is a one-time only chore.
STEP 1.
Load your dishwasher
with dishes, silverware, pots, pans,
bowls, etc. according to
instructions on pages 8 and 9.
STEP 2.
Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. (See page 6.)
Connect unicouple and
electricity
according to instructions on pages
11 and 12.
STEP 3.
Select DRYING HEAT
Option. It must be on HEATED
DRYING for PLATE WARMER
cycle, on ENERGY SAVER for
either drying option (see below)
for any of the wash cycles.
HEATED ENERGY
DRYING
SAVER
HEATED DRYING: Turns the
drying heater on for fast drying.
ENERGY SAVER: (no-heat drying).
Turns the drying heater off to save
energy. Dishes dry naturally over a
longer period such as overnight.
If you need your dishes sooner,
open the dishwasher door after the
cycle is complete to reduce the
natural drying time.
ENERGY
Use of this option reduces the
electrical energy used by this
model approximately 10% for
Normal cycle.
STEP 4. Select the Cycle and start
dishwasher.
If your dishwasher drains into a
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher. (See Cycle
selection hints on next page. )
To obtain the benefits of a complete
cycle, be careful that you do not
turn the dial any further than
necessary
For POTSCRUBBER and
NORMAL WASH:
a. Push selected cycle button.
b. Latch the door.
Door Latch
(Locked)
to start the dishwasher.
SCRUBBER WASH
4
Cycle Indicator Dial
(Turn to Start)
WASH.
P ATE WARMER
.
ON
OFF
\.----<
LAT
c. Slowly turn Cycle Indicator Dial
to ON position to start the cycle.
You will hear the motor start.
There is a time delay between
start-up and water fi-ll so you will
not hear any wash action right
away.
For LIGHT WASH cycle:
ON
OFF
a. Be sure door is unlatched.
b. Push NORMAL WASH button.
c. Slowly turn Cycle Indicator Dial
to LIGHT WASH position.
d. Latch door to start the cycle.
For RINSE HOLD cycle:
ON /
OFF
-
Be sure door is unlatched.
a.
b.
Select ENERGY SAVER drying
option.
c.
Slowly turn Cycle Indicator
Dial to RINSE HOLD position.
d.
Latch the door to start the cycle.
RINSE & HOLO
, WARMER
ORYING
RINSE & HOLD
ORYING

PLATE WARMER

Advertisement

Table of Contents
loading

  Also See for GE GSC470