Removing / Replacing Drain Handle; Removing / Replacing Impeller - European Touch Solace FORTE' Owner's Manual

Tools required:
Phillips head screwdriver
Check your state and local regulations for cleaning procedures. Links to your state boards can be
found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed
"Crystal Clean™ Pipe-Free
Whirlpool
(With Jets)
recommendations.
Follow the steps below for cleaning and replacing parts:
Step 1: To remove the chrome handle pull it
forward. If difficult to remove, gently pry it
off with the screwdriver.
Step 2: To remove the handle adapter, place
Phillips head screwdriver into upper slot to
reach screw, as shown in picture above.
Unscrew and then pull adapter forward.
Check your state and local regulations for cleaning procedures. Links to your state boards can be
found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed
"Crystal Clean™ Pipe-Free
recommendations.
Follow the steps below for cleaning and replacing parts:
Step 1: Remove the Tee Knobs
by turning
clockwise.
Step 2: Lift the footplate to
remove.
Document ID:06080001

Removing / Replacing Drain Handle

®
Spa - Cleaning and Disinfecting Procedures," page 17, and "Traditional
- Spa Cleaning and Disinfecting Procedures," page 19, for cleaning

Removing / Replacing Impeller

®
Spa - Cleaning and Disinfecting Procedures," page 17, for cleaning
Step 3: Unscrew to remove the
counter impeller knob.
Step 4: Lift the impeller.
Rev: B
Step 3: Picture, with the adapter removed,
shown for cleaning reference.
Step 4: Picture, with Drain Plunger removed,
shown for cleaning reference.
Step
Step 6: Press firmly down on
Technical Support: 800-626-6912
5: Complete steps
through 4 in reverse to
replace the parts.
footplate to help seal while
tightening Tee Knobs.
Page 21 of 24
1