Related Manuals for European Touch Solace FORTE'
Summary of Contents for European Touch Solace FORTE'
- Page 1 ’ ORTE LTERA, and RIMA Solace Spas Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 1 of 24...
-
Page 2: European Touch - Limited Warranty
EUROPEAN TOUCH are limited to those set forth herein, and other obligations, expressed or implied are assumed by EUROPEAN TOUCH. No dealer or other person has any authority to bind EUROPEAN TOUCH to changes or additions to this warranty or its products. Accordingly, EUROPEAN TOUCH is not responsible for any such warranties or representations. -
Page 3: Important Information
OWNERS MANUAL For Solace Whirlpool Pedicure Spa Models: ® ’ ORTE LTERA, RIMA IMPORTANT INFORMATION Serial Number: W/O Number: Installed by: Installation Date: Serial Number W/O Number Note: Vietnamese and Korean translations available upon request. Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 3 of 24... -
Page 4: Table Of Contents
Table of Contents EUROPEAN TOUCH - LIMITED WARRANTY ................. 2 IMPORTANT INFORMATION ....................3 Introduction..........................5 Important Requirements ......................5 Precautions ..........................5 Health Risk Warning ......................5 Installation Specifications Summary ..................6 Location and Support ......................6 Important Installation and Utility Information ............... 7 Dimensional Drawings ...................... -
Page 5: Introduction
AM to 5 PM CST. After hours calls are recorded and attended to the next business day. Important Requirements EUROPEAN TOUCH requires that you contact a local, licensed plumber and licensed electrician to install your new pedicure spa. Installation must be in compliance with all your local and state building codes. -
Page 6: Installation Specifications Summary
Installation Specifications Summary Note: Failure to comply with federal, state or local codes and ordinances will result in the warranty being null and void. As stated, the pedicure spa installation must comply with all plumbing and electrical codes. A licensed plumber and licensed electrician must complete the applicable connections of the pedicure spa. -
Page 7: Important Installation And Utility Information
Important Installation and Utility Information Electrical Service: A 110V, 60 Hz, 15 Amp GFCI protected grounded circuit must be used to supply power to the pedicure spa. (220V if ordered in 220V configuration) Water Supply: All plumbing connections must conform to local codes. Normal water pressure of 30 to 80 PSI is required to correctly fill the basin to the proper level. -
Page 8: Dimensional Drawings
Dimensional Drawings Crystal Clean™ Pipe-Free® and Traditional Whirlpool (With Jets) Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 8 of 24... -
Page 9: Crystal Clean ™ Pipe-Free
™ ® Crystal Clean Pipe-Free Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 9 of 24... -
Page 10: Traditional Whirlpool (With Jets)
Traditional Whirlpool (With Jets) Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 10 of 24... -
Page 11: Specifications
Specifications Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base) See pages seven through ten. Drain installation: references noted on pages seven through ten, can be installed with optional power drain pump or as gravity drain. Overall dimensions without accessories, seat upright: 54"L (138cm) x 31"W (82cm) x 56"H (143cm)* Without accessories, seat collapsed: (shipping position): 54"L (138cm) x 32"W (82cm) x 36"H... -
Page 12: Attaching The Seat Back
Attaching the Seat Back Your pedicure spa shipped with the seat bottom and seat back already attached to the base. Follow these instructions to connect the seat back to the pedicure spa: Forte’ Altera and Prima Step 1: Remove the hitch and clevis pins located Step 1: Remove the hitch and clevis pins on the seat back mounting bracket on the back located on the seat back mounting bracket on... -
Page 13: Unpacking The Cushions
Altera Vibration Massage Only: The remote and junction box Please make sure that all parts are removed from the box before discarding the box. If any parts are missing, the customer must contact EUROPEAN TOUCH within 30 days of the delivery date for replacement at 800-626-6912. -
Page 14: Attaching The Cushions
Attaching the Cushions All pedicure spa cushions attach to the pedicure spa with Velcro. The Forte' and Altera Pedicure spas have cables for the cushions that need to be routed properly. Follow these instructions for attaching the cushions properly to your pedicure spa: Use the following instructions for all cushion models: Step 1: Your pedicure spa will Step 4: Remove the protective film... -
Page 15: Component Reference
Please use pedicure products and cleaning solutions in accordance with each manufacturer's directions. EUROPEAN TOUCH whirlpool pedicure spas will give you many years of service as long as proper precautions and precise cleaning and operating instructions are followed. It is the responsibility of the pedicure spa owner to properly clean the pedicure spa. -
Page 16: Crystal Clean ™ Pipe-Free ® Spa - Operating Instructions
™ ® Crystal Clean Pipe-Free Spa - Operating Instructions Preparing the Pedicure Spa for Operation: After the pedicure spa is installed and the plumbing and electrical connections are made, clean and disinfect the basin before initial use. Rinse the basin by using the attached water sprayer. Wipe the basin dry with a clean towel. -
Page 17: Crystal Clean ™ Pipe-Free ® Spa - Cleaning And Disinfecting Procedures
™ ® Crystal Clean Pipe-Free Spa - C leaning and Disinfecting Procedures Please check with your state board for required cleaning and disinfecting procedures. It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day, and once a week for overnight cleaning. -
Page 18: Traditional Whirlpool (With Jets) - Operating Instructions
Traditional Whirlpool - Operating Instructions (With Jets) After the pedicure spa is installed and the plumbing and electrical connections are made, clean and disinfect the basin before initial use. Rinse the basin by using the attached water sprayer. Wipe the basin dry with a clean towel. -
Page 19: Traditional Whirlpool (With Jets) - Spa Cleaning And Disinfecting Procedures
Traditional Whirlpool - Spa Cleaning and Disinfecting (With Jets) Procedures Please check with your state board for required cleaning and disinfecting procedures. It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day, and once a week for overnight cleaning. -
Page 20: Removal / Replacing Jet Parts
Removal / Replacing Jet Parts Tools required: Pliers 7/8" deep well socket with extension Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed “Traditional Whirlpool - Spa Cleaning and Disinfecting Procedures,”... -
Page 21: Removing / Replacing Drain Handle
Removing / Replacing Drain Handle Tools required: Phillips head screwdriver Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed ®... -
Page 22: History And Notes
History and Notes Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 22 of 24... - Page 23 History and Notes Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 23 of 24...
- Page 24 EUROPEAN TOUCH 8301 W. Parkland Court Milwaukee, WI 53223 Phone Number: 414-357-7016 Toll Free: 800-626-6912 Fax: 414-357-6360 Web Site: www.europeantouch.com Email: info@europeantouch.com Document ID:06080001 Rev: B Technical Support: 800-626-6912 Page 24 of 24...