Related Manuals for European Touch FORTE SPA
Summary of Contents for European Touch FORTE SPA
- Page 1 The World's Finest Pedicure Spas ’ WNER ANUAL ORTE & LTERA RYSTAL LEAN & RADITIONAL HIRLPOOL...
- Page 2 If examination of the Pedicure Spa by European Touch during the applicable warranty period shows it to have a defect in material or workmanship, European Touch will, at its option, repair or replace the defective component or part thereof. Further, European Touch may, at its discretion, replace a defective component or part with a refurbished component or part, or may replace the Pedicure Spa with a refurbished pedicure spa.
- Page 3 • European Touch shall not be liable for any other obligations or liabilities, including, but not limited to: obligations or liabilities arising out of breach of contract or warranty, negligence,...
-
Page 4: Conditional * Warranty
Certificate of Compliance European Touch 8301 W. Parkland Court Milwaukee, WI U.S.A. 53223 For Compliance of: Equipment: Whirlpool Pedicure Spa Model No.: SOLACE – PF & SOLACE – PF PDP Rated: 220-240VAC, 50Hz, 7.5A To the following standard(s): EN60335-1:2002 EN60335-2-32:2002... -
Page 5: Mportant Nformation
OWNERS MANUAL For Whirlpool Pedicure Spa Models: ORTE and LTERA MPORTANT NFORMATION Serial Number: W/O Number: Installed by: Installation Date: Serial Number W/O Number Note: Vietnamese and Korean translations available upon request. Document ID:06080001 Rev: L Technical Support: 800-626-6912 Page 5 of 24... -
Page 6: Table Of Contents
ABLE OF ONTENTS ....E UROPEAN OUCH IMITED ONDITIONAL ARRANTY RROR OOKMARK NOT DEFINED .......................4 ERTIFICATE OF OMPLIANCE ......................5 MPORTANT NFORMATION ..........................7 NTRODUCTION ......................7 MPORTANT EQUIREMENTS ...........................7 RECAUTIONS ......................7 EALTH ARNING ..................8 NSTALLATION PECIFICATIONS UMMARY ......................8 OCATION AND UPPORT ..............9 MPORTANT NSTALLATION AND TILITY... -
Page 7: Introduction
MPORTANT EQUIREMENTS EUROPEAN TOUCH requires that you contact a local, licensed plumber and licensed electrician to install your new pedicure spa. Installation must be in compliance with all your local and state building codes. Your pedicure spa cannot operate efficiently or safely unless it is provided with adequate electrical power, sufficient water pressure, proper water temperature, and required drainage capabilities. -
Page 8: Installation Specifications
NSTALLATION PECIFICATIONS UMMARY Note: Failure to comply with federal, state or local codes and ordinances will result in the warranty being null and void. As stated, the pedicure spa installation must comply with all plumbing and electrical codes. A licensed plumber and licensed electrician must complete the applicable connections of the pedicure spa. -
Page 9: Important Installation And
MPORTANT NSTALLATION AND TILITY NFORMATION Electrical Service: 110V: A 110V, 60 Hz, 15 Amp GFCI protected grounded circuit must be used to supply power to the pedicure spa. (220V if ordered in 220V configuration) 220V: A 220-240VAC, 50Hz, 7.5 Amp GFCI protected grounded circuit must be used to supply power to the pedicure spa per local code. -
Page 10: Imensional Rawings
IMENSIONAL RAWINGS ™ P ® RYSTAL LEAN RADITIONAL HIRLPOOL Document ID:06080001 Rev: L Technical Support: 800-626-6912 Page 10 of 24... -
Page 11: Ree
™ ® RYSTAL LEAN Document ID:06080001 Rev: L Technical Support: 800-626-6912 Page 11 of 24... -
Page 12: Ith Jets )
RADITIONAL HIRLPOOL Document ID:06080001 Rev: L Technical Support: 800-626-6912 Page 12 of 24... -
Page 13: Crystal Clean ™ Pipe -F
PECIFICATIONS Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base) See pages seven through ten. Drain installation: references noted on pages seven through ten, can be installed with optional power drain pump or as gravity drain. Overall dimensions without accessories, seat upright: 54"... -
Page 14: Ttaching The
TTACHING THE Your pedicure spa shipped with the seat bottom and seat back already attached to the base. Follow these instructions to connect the seat back to the pedicure spa: Forte Altera Step 1: Remove the hitch and clevis pins located Step 1: Remove the hitch and clevis pins on the seat back mounting bracket on the back of located on the seat back mounting bracket on... -
Page 15: Npacking The
Altera Vibration Massage Only: The remote and junction box Please make sure that all parts are removed from the box before discarding the box. If any parts are missing, the customer must contact EUROPEAN TOUCH within 30 days of the delivery date for replacement at 800-626-6912. -
Page 16: Attaching The Cushions
TTACHING THE USHIONS All pedicure spa cushions attach to the pedicure spa with Velcro. The Forte and Altera Pedicure spas have cables for the cushions that need to be routed properly. Follow these instructions for attaching the cushions properly to your pedicure spa: Step 1: Your pedicure spa will Step 4: Remove the protective film Step 7:... -
Page 17: Component Reference
Always use pedicure products and cleaning solutions in accordance with each manufacturer's directions. EUROPEAN TOUCH whirlpool pedicure spas will give you many years of service as long as proper precautions, precise cleaning, and operating instructions are followed. It is the responsibility of the pedicure spa owner to properly clean and maintain the pedicure spa. -
Page 18: Nstructions
™ ® RYSTAL LEAN PERATING NSTRUCTIONS Preparing the Pedicure Spa for Operation: After the pedicure spa is installed and the plumbing and electrical connections are made, clean and disinfect the basin before initial use. Rinse the basin by using the attached water sprayer. Wipe the basin dry with a clean towel. -
Page 19: Isinfecting Procedures
™ ® RYSTAL LEAN LEANING AND ISINFECTING ROCEDURES Always check with your state board for required cleaning and disinfecting procedures. It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day, and once a week for overnight cleaning. Regular cleaning will help keep your pedicure spa in good working condition. -
Page 20: Nstructions
RADITIONAL HIRLPOOL PERATING NSTRUCTIONS After the pedicure spa is installed and the plumbing and electrical connections are made, clean and disinfect the basin before initial use. Rinse the basin by using the attached water sprayer. Wipe the basin dry with a clean towel. To Operate the Pedicure Spa, Follow These Easy Steps: Adding Water to the Pedicure Spa Basin: 1. -
Page 21: Leaning And
RADITIONAL HIRLPOOL LEANING AND ISINFECTING ROCEDURES Always check with your state board for required cleaning and disinfecting procedures. It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day, and once a week for overnight cleaning. Regular cleaning will help keep your pedicure spa in good working condition. -
Page 22: Parts
EMOVAL EPLACING ARTS Tools required: Pliers 7/8" deep well socket with extension Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed “Traditional Whirlpool - Spa Cleaning and Disinfecting Procedures,”... -
Page 23: Mpeller
EMOVING EPLACING RAIN ANDLE Tools required: Phillips head screwdriver Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed ® “Crystal Clean™... - Page 24 EUROPEAN TOUCH 8301 W. Parkland Court Milwaukee, WI 53223 Phone Number: 414-357-7016 Toll Free: 800-626-6912 Fax: 414-357-6360 Web Site: www.europeantouch.com Email: info@europeantouch.com...