Attaching The Seat Back - European Touch Solace FORTE' Owner's Manual

Your pedicure spa shipped with the seat bottom and seat back already attached to the base. Follow
these instructions to connect the seat back to the pedicure spa:
Forte'
Step 1: Remove the hitch and clevis pins located
on the seat back mounting bracket on the back
of the chair.
Step 2: Slide the seat bracket into the black end
on the linear actuator, and line up the holes.
Step 3: Slide the clevis pin through the holes and
secure by inserting the hitch pin through the
small hole on the clevis pin.
Document ID:06080001

Attaching the Seat Back

Step 1: Remove the hitch and clevis pins
Step 2: Line up the hole on the seat bracket with
Step 3: Slide the clevis pin through the holes
Rev: B Technical Support: 800-626-6912
Altera and Prima
located on the seat back mounting bracket on
the back of the chair.
the hole on the cylinder end.
For Prima, line up with second hole.
and secure by inserting the hitch pin through
the end hole on the clevis pin.
Page 12 of 24