Triggering A Self-Timer Operation With Motion - Casio Exilim EX-FC500S User Manual

Triggering a Self-timer Operation with Motion (Handsfree)
With the Handsfree Mode, the camera automatically
triggers a self-timer countdown whenever it detects
movement in the vicinity of an icon on the monitor
screen. This means you can control operation of the
self-timer from a distance by waving your hand, so you
can include yourself in the image being shot.
1.
Select one of the following as the recording
mode: Program Auto, Premium Auto Pro, or
Make-up or HS Best Selection (BEST SHOT
scene).
• Movie shooting is disabled while the HS Best Selection BEST SHOT scene is
being used.
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select "r REC MENU" tab, and then
press [6].
4.
Use [8] and [2] to select "Handsfree", and then press [SET].
5.
Use [8] and [2] to select "Motion Shutter", and then press [SET].
6.
Use [8] and [2] to select "Always" or "180°only", and then press
[SET].
• If you select "180°only", go to step 7. Selecting "Always" enters the Handsfree
Mode. Advance to step 8.
7.
If you selected "180°only" in step 6 above, tilt the camera's monitor
screen 180 degrees (page 18).
This enters the Handsfree Mode.
8.
Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
The start self-timer icon will change to "
standby for shooting.
9.
Facing the camera, move your hand or perform some other movement
in the vicinity of the
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
" to indicate that the camera is in
(start self-timer) icon on the monitor screen.
63
Snapshot Tutorial