Table of Contents
Advertisement
Inserting a Subject into another Snapshot or Adding a Built-in
Frame to a Snapshot (Paste subject)
Procedure
Enter the PLAY Mode * MENU * Paste subject
You can add the camera's built-in characters or frames to snapshots, or you can
insert characters you create with "Cut out subject" (page 77) into snapshots.
• Only an image that satisfies the following conditions can be used as a background
image.
– It must be a snapshot recorded with this camera or a snapshot transferred to this
camera's memory.
– It must be an image with an aspect ratio of 4:3.
1.
Touch "ú" or "õ" or drag left or right to scroll through images. Select
image you want to use as the background and then touch "OK".
2.
Touch "ú" or "õ" or drag left or right to scroll though subjects. Select
the subject you want to insert and then touch "OK".
3.
Touch "+" (zoom in) and "–" (zoom out) to
adjust the size of the subject. You also can
drag the subject around the screen to
reposition it.
4.
After the subject's size and position are the
way you want, touch "OK".
This inserts the subject into the background image.
NOTE
• Performing a delete or format operation will not delete the built-in subjects.
B
79
Other Playback Functions (PLAY)
Advertisement
Table of Contents
