Selecting The Hdmi Terminal Output Method; Displaying A Startup Screen At Power On - Casio EX-TR10 User Manual

Selecting the HDMI Terminal Output Method (HDMI)
Procedure
MENU * Setup * HDMI
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
This setting will cause the format to change automatically in accordance
Auto
with the connected TV. Normally, you should use this mode.
1080i 1080i format output*
480p 480p format output
576p 576p format output
*
1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception area
that does not support 1080i 60i. If you are in a PAL reception area and nothing is
displayed automatically, change the setting to 576p.
• If an image does not appear when "Auto" is selected as the output method, try
changing this setting to something else.
Displaying a Startup Screen at Power On (Startup)
Procedure
MENU * Setup * Startup
Selecting "On" for Startup causes a built-in startup screen to appear on the monitor
screen whenever the camera is turned on.
98
Other Settings (Set Up)