To Format (Initialize) A New Memory Card - Casio EX-TR10 User Manual

. To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest of
the way and then insert another one.
• Never remove a card from the camera
while the back lamp is flashing green.
Doing so can cause the image save
operation to fail and even damage the
memory card.

To format (initialize) a new memory card

Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1.
Load a memory card (page 27).
2.
Turn on the camera and then touch "MENU".
• If "MENU" is not displayed on the screen, touch the tab to display it (page 37).
3.
Drag upwards and downwards until you find "Setup", and then touch it.
4.
Touch "Format".
5.
Touch "Format" and then touch "Yes".
This starts the memory card format operation.
28
Quick Start Basics