To Format (Initialize) A New Memory Card - Casio Exilim EX-TR750 User Manual

. To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
IMPORTANT!
• Turn off the camera before replacing the memory
card.
• The operation lamp (page 8) will flash green for some time after you press [
(Power) to turn off the camera. Never remove the memory card while the operation
lamp is flashing green. Doing so can cause the image save operation to fail and
even damage the memory card.

To format (initialize) a new memory card

Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1.
Load a memory card (page 28).
2.
Turn on the camera and then touch "
3.
Touch "MENU".
4.
Drag upwards and downwards until you find "Setup", and then touch it.
5.
Touch "Format".
6.
Touch "Format" and then touch "Yes".
This starts the memory card format operation.
" (Show Icons).
29
]
Quick Start Basics