PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M6 Washer
M4 x 16mm
M6 x 18mm
M6 x 30mm
Screw (75)–4
(88)–8
Screw (77)–10
Screw (25)–4
M8 x 22mm
M8 x 38mm
M10 x 62mm Screw (70)–4
Screw (69)–2
Screw (67)–4
M10 x 122mm Screw (65)–4
7