Primera AP360e Quick Start Manual page 9

14. Adjust the label guides so that they are just touching the edge of the label stock. Do not pinch
the labels between the guides. If the guides are loose pull them away from the label stock and
tighten the thumbscrews. When the thumbscrews are tight, you can still move the guides.
Figure 2-11.
Figure 2-12.
Note: Guides can be removed and swapped to accommodate narrower labels. To accomplish this
it is only necessary to remove one of the guides. See Section 6 for instructions.
Thumbscrews
AP360/362 Label Applicator 9