Setting; Language; Menu Position; Auto Setup - Panasonic PT-TW230E Operating Instructions Manual

Setting

Select [Setting] from the Main Menu (see
"Navigating through the menu" on page 32),
then select the item from the sub-menu.
Remote control

Language

1 ) Press ▲▼ to select [Language].
2 ) Press ► or the <ENTER> button.
3 ) Press ▲▼ to select the desired

language.

The language used in the On-Screen Menu is
z
available in English, German, French, Italian,
Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian,
Czech, Russian, Turkish, Arabic, Kazak,
Vietnamese, Chinese, Korean, Japanese and Tha
48
- ENGLISH
Control panel
i.

Menu position

This function is used to change the position of the On-
Screen Menu.
1 ) Press ▲▼ to select [Menu position].
2 ) Press the <ENTER> button to change
the position.
The Menu position changes each time you
z
press <ENTER> button as follows:
the center → the bottom left → the bottom right → the
top left → the top right → the center......

Auto setup

1 ) Press ▲▼ to select [Auto setup].
2 ) Press ► or the <ENTER> button.
3 ) Press ▲▼ to select these functions as
follows:
Input search
J
This function detects the input signal
automatically. When a signal is found, the search
will stop.
Off Input search will not work
On 1 Input search works*
On 2 Input search works*
*1 : ● When pressing the <AUTO SETUP> button on the
remote control.
*2 : ● When turning on the projector by pressing the
< >
button on the remote control.
●
When pressing the <AUTO SETUP> button on the
remote control.
●
When the current input signal is cut off.*
* If the AV mute or Freeze function is active, cancel
it to activate the Input search. It is also unavailable
when On-Screen menu is displayed.
Auto PC adj.
J
On Enables Auto PC adjustment *
Off Disables Auto PC adjustment
*1 : When pressing the <AUTO SETUP> button on
the remote control.
Note
[Input search] and [Auto PC adj.] cannot be set [Off] at
z
the same time.
1
2
1