Control Panel; Side Terminals - Panasonic PT-TW230E Operating Instructions Manual

Control panel

(1)
(2)
(6)

Side terminals

(1)
(1) LAN
Connects to a LAN cable for network connection.
(2) HDMI
Connects to HDMI input signals.
(3) COMPUTER IN 1/ COMPONENT IN
Connects to COMPUTER IN 1/ COMPONENT IN
input signals.
(4) COMPUTER IN 2/ MONITOR OUT
Connects to COMPUTER IN 2/ MONITOR OUT
input signals or outputs the analog RGB signals
input the projector.
(5) S-VIDEO IN
Connects to S-VIDEO input signals.
(6) AUDIO OUT (VARIABLE)
Outputs the audio signals input to the projector.
(7) CONTROL PORT
Connects to a computer via an RS-232C cable.
(3) (4)
(5)
(2) (3)
(8)
About Your Projector
(1) < >button
Turn the projector on/off.
(2) ▲▼◄► (VOL -/+) buttons
Navigate the MENU screen.
(3) <ENTER> button
Execute the selected item.
(4) <MENU> button
Displays the MENU screen. (
(5) <KEYSTONE> button
Correct the keystone distortion. (
(6) <INPUT> button
Selects the input signal. (
(5)
(4)
(10)
(9)
(8) Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
(9) VIDEO IN
Connects to VIDEO input signals.
(10) AUDIO IN
Connects to the audio input signals.
AUDIO IN has right and left (L and R) terminals.
(11) COMPUTER / COMPONENT AUDIO IN
Connects the audio output (stereo) from a
computer or video equipment connected to (2),
(3) or (4) to this jack
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
page 32)
Æ
page 30)
Æ
page 29)
Æ
(6) (7)
(11)
ENGLISH -
17