Custom Adj; Digital Zoom; Keystone - Panasonic PT-TW230E Operating Instructions Manual

Custom adj.

Adjust the screen scale and position manually with
this function.
1 ) Press ▲▼ to select [Custom adj.].
2 ) Press ► or the <ENTER> button to
enter the next submenu.
3 ) Press ▲▼ to choose the item you
want to adjust.
You can choose one from the items as below:
z
Adjust the Horizontal/Vertical screen
Scale H/V
scale.
When set to [On], the aspect ratio is
H&V
fixed.
Adjust the Horizontal/Vertical screen
Position H/V
position.
Save the adjusted scale or position
Common
to all the inputs.
Reset Reset the all adjusted values.

Digital zoom +

Zoom in the images.
1 ) Press ▲▼ to select [Digital zoom +]
and then press the <ENTER> button.
The On-Screen Menu disappears and
z
[D. zoom + ] appears.
2 ) Press the <ENTER> button to zoom in
the image size and press ▲▼ ◄► to
move the image to the top/bottom/left/
right of the screen.
The Panning function can work only when the
z
image is larger than the screen size. A projected
image can be also expanded by pressing the
<D.ZOOM + > or the <ENTER> button.
Digital zoom -
Zoom out the images.
1 ) Press ▲▼ to select [Digital zoom -]
and then press the <ENTER> button.
The On-Screen Menu disappears and
z
[D. zoom - ] appears.
2 ) Press the <ENTER> button to zoom
out image size.
The projected image can be also compressed
z
by pressing the <D.ZOOM – > or the <ENTER>
button.
To exit the Digital zoom +/– mode, press any button
except the <D.ZOOM +/–>, <ENTER> and ▲▼◄►
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the Input Source Selection Menu
( Æ page 37) again, or adjust the screen size with the
<D.ZOOM +/–> buttons.
Note
When input computer signal to the projector,
z
[Digital zoom +/-] will be available.
[Digital zoom +/-] cannot be selected when [True] is
z
selected in the Screen aspect
[Digital zoom +/–] are disabled and cannot be displayed
z
when [480i], [576i], [480p], [576p], [720p], [1035i] or
[1080i] is selected in the PC System Menu
When [Digital zoom +/–] functions are disabled,
z
mark will appear.

Keystone

This function is used to adjust keystone distortion of
the projected image.
1 ) Press ▲▼ to select [Keystone].
2 ) Press ► or the <ENTER> button.
3 ) Press ▲▼ to choose the item you
want to adjust.

Keystone

To correct keystone distortion
To store or reset the keystone
Store
correction
The following items are the
submenus of [Store].
Keep the keystone correction
Store even when the AC power cord is
unplugged or turning off the projector.
Release the keystone correction
Reset when the AC power cord is
unplugged .
Screen
.
( )
Æ page 35 .
ENGLISH -
45