GE PV977 Owner’s Manual And Installation Instruction page 11

TOOLS AND MATERIALS
REQUIRED (NOT SUPPLIED)
Pencil and tape measure
Spirit level
Phillips screwdriver
Electric drill with 3/16"
bits, #2 Phillips head
Step ladder
UL listed wire nuts
Aluminized Strain relief for
Duct tape junction box
49-2000833 Rev. 0
Installation Preparation
Safety glasses
Hammer
Flashlight
Metal snips
Pliers
Wire cutter/stripper
Saber saw or Key Hole saw
8" Round metal
duct, length to
suit installation
120V 60Hz. 15 or 20 Amp,
2-wire with ground, properly
grounded branch circuit
REMOVE THE PACKAGING
CAUTION
Wear gloves to protect against
sharp edges.
• Remove the duct covers.
• Remove the hardware bag, literature package
and other boxed parts.
• Remove and properly discard the protective
plastic wrapping and other packaging
materials.
11