Table of Contents
Advertisement
8. Fax
Activating FAX ONLY mode with the cordless
handset (KX-MB2060 optional)
1. MMENUN (soft key)
2. "Answering device" A MSELECTN (soft key)
3. "Answer on" A MSELECTN (soft key) A MOFFN
Note:
R Make sure feature #400 is set to "FAX ONLY"
beforehand (page 81).
How faxes are received
When receiving calls, the unit will automatically answer
all calls and only receive fax documents.
Note:
R The number of rings before a call is answered in FAX
ONLY mode can be changed (feature #210 on
page 80).
If you have subscribed to a Distinctive Ring service
See page 68.
Transferring received fax document automatically to
email address
You can transfer the received fax document (fax to email
feature) to desired email address automatically.
Transferred messages will not be deleted from the unit.
To activate this feature, set the following:
– Activate the fax to email address (feature #452 on
page 86)
– Program the email server settings (page 97) and
the email destinations (page 98)
– Set the fax to email destinations (page 87)
Note:
R To check the status of the transfer, see page 87.
Useful information:
See "Transferring received fax document/voice
message automatically to email address", page 63.
64
8.7 Receiving a fax manually:
Auto answer OFF
R A4 or letter size recording paper can be used.
8.7.1 Activating TEL mode
Press MAuto AnswerN repeatedly to display "TEL
MODE".
R The MAuto AnswerN light on the base unit turns OFF.
Auto Answer
Auto Answer
Réception auto
Réception auto
MCN
MsN
Activating TEL mode with the cordless handset
(KX-MB2060 optional)
1. MMENUN (soft key A)
2. "Answering device" A MSELECTN (soft key
A)
3. "Answer off" A MSELECTN (soft key A) A
MOFFN
How to receive phone calls and faxes with the
handset of base unit
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
MStartN
A
MOFFN
Advertisement
Table of Contents
