Table of Contents
Advertisement
6.1 Making phone calls
6.1.1 With the base unit
MRedialN MMonitorN
MIntercomN
1
Lift the handset.
2
Dial the telephone number.
3
To hang up, replace the handset.
To redial the last number dialed from the base unit
MMonitorN A MRedialN
To put a call on hold
1. Press MIntercomN 2 times during an outside call and
then replace the handset.
2. To release hold, press MMonitorN or lift the handset.
R You can also take the call at the cordless handset
by pressing M
N or M N (KX-MB2060 optional).
Note:
R If a call is kept on hold for more than 9 minutes, an
alarm tone starts to sound. After 1 additional minute
on hold, the call is disconnected.
R If another telephone is connected to the same line,
you can also take the call by lifting its handset.
6.1.2 With the cordless handset (KX-MB2060
optional)
MCN
MCNMDNMEREDIALN
MsN
1
2
3
Note:
R While talking using M
R For best performance, use the speakerphone in a
To mute your conversation
While mute is turned ON, you can hear the other party,
but the other party cannot hear you.
1. Press MMUTEN (soft key A) during conversation.
2. To return to the conversation, press MMUTEN (soft
Note:
R MMUTEN (soft key A) is a soft key visible on the
Handset equalizer
This feature clarifies the voice of the person you are
talking to, producing a more natural-sounding voice that
is easier to hear and understand.
1. Press MMENUN (soft key A) while talking.
2. "Equalizer" A MSELECTN (soft key A)
3. Press MCN or MDN repeatedly to select the desired
4. Press MOKN (soft key A) to exit.
Note:
R When this feature is activated,
R Depending on the condition and quality of your
R This feature is not available while using the
To put a call on hold
1. Press MMENUN (soft key A) during an outside call.
A
2. "Hold" A MSELECTN (soft key A)
3. To release hold, press M
MOFFN
Lift the cordless handset and dial the telephone
number.
R To correct a digit, press MCLEARN (soft key A).
M
N or MCALLN (soft key A)
R To make hands-free telephone calls, press M N.
To hang up, press MOFFN or place the cordless
handset on the charger.
N, you can switch to a
hands-free telephone conversation by pressing M N.
To switch back, press M
quiet environment.
R MMUTEN (soft key A) flashes.
key A) again.
cordless handset display during a call.
setting.
talking.
telephone line, this feature may emphasize existing
line noise. If it becomes difficult to hear, turn this
feature off.
speakerphone.
R Another cordless handset user can take the call
by pressing M
N.
R You can also take the call at the base unit by
pressing MMonitorN or lifting the handset.
6. Telephone
N.
is displayed while
N.
49
Advertisement
Table of Contents
