10.Safety Halt - Samsung BACnet MIM-B17N User Manual

Safety Halt
Safety Halt
192.168.0.100
06:12:13(AM)
1. Check main menus by pressing [Menu], [ ], [ ] or [Set] button.
MAIN MENU

10.Safety Halt

2. Select 10.Safety Halt by pressing [ ] and [ ] buttons.
Are you sure?
YES:Set, NO:Menu
3. Press [Set] button.
Confirm message will appear.
Now sleeping..
See you again
4. Press [Set] button.
All functions of DMS2 will stop and 'Now Sleeping..' phrase will appear.
Note Safety halt function is an operation that saves data of DMS2 and then
stops service safely. Use this function when relocation and system restart
are needed.
This function will not transfer DMS2 power to OFF status. Therefore, when
the screen above appears, press [RESET] button on the bottom of DMS2 or
remove power cable. If you do not press [RESET] button or remove power
after 10 minutes passed, DMS2 will restart automatically.
163
E-