3
Enter administrator's password and then click [OK].
4
Tracking information window pops up. Check and click [OK]
to continue.
Execute tracking depending on the communication mode
set by communication mode setting by channel.
(1) When 'NEW' is set as communication mode,
DMS2 executes tracking on devices that supports
NEW communication.
(2) When 'IM' is set as communication mode, DMS2
executes tracking on SIM/PIM.
5
"Tracking is in progress. Please wait." message appears.
Tracking takes from tens of seconds to several
ten minutes.
However, it may vary depending on the number of
installed controllers.
141
E-