Safety Halt
Safety Halt
192.168.0.100
06:12:13(AM)
1. Check main menus by pressing [Menu], [▲], [▼] or [Set] button.
MAIN MENU
10.Safety Halt
2. Select 10.Safety Halt by pressing [▲] and [▼] buttons.
Are you sure?
YES:Set, NO:Menu
3. Press [Set] button.
Confirm message will appear.
Now sleeping..
See you again
4. Press [Set] button.
All functions of DMS2 will stop and 'Now Sleeping..' phrase will appear.
Note
S afety halt function is an operation that saves data of DMS2 and then
stops service safely. Use this function when relocation and system restart
are needed.
T his function will not transfer DMS2 power to OFF status. Therefore, when
the screen above appears, press [RESET] button on the bottom of DMS2 or
remove power cable. If you do not press [RESET] button or remove power
after 10 minutes passed, DMS2 will restart automatically.
BUTTON LOCKED
07:30:21(AM)
145
E-