AEG HG654320NM User Manual page 10

10
Installation
This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.
Before switching on, make sure the electricity supply voltage is the same as that indicated
on the hob rating plate. The rating plate is located on the bottom of the hob.
The hob is supplied with a 3 core flexible supply cord incorporating a 3 amp plug fitted. In
the event of having to change the fuse, a 3 amp ASTA approved (BS 1362) fuse must be
used.
1 Green and Yellow
2 3 amp fuse
3 Brown
4 Cord clamp
5 Blue
Should the plug need to be replaced for any reason, the wires in the mains lead are col-
oured in accordance with the following code:
Green and Yellow
Blue
Brown
1. Connect the green and yellow (earth) wire to the terminal in the plug which is marked
with the letter 'E' or the earth symbol
2. Connect the blue (neutral) wire to the terminal in the plug which is marked with the
letter 'N' or coloured black.
3. Connect the brown (live) wire to the terminal in the plug which is marked with the let-
ter 'L' or coloured red.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp
must be secure over the outer sheath.
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that
the cut off plug is disposed of safely.
The replacement of electric cable must be carried out exclusively by the service force centre
or by personnel with similar competencies, in accordance with the current regulations.
1 2
5
- Earth
- Neutral
- Live
or coloured green and yellow.
3
4