Troubleshooting - AEG BEB231011M User Manual

20 www.aeg.com
12.4 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1
Step 2
Step 3
Step 4

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table
please contact with an Authorised
Service Centre.
Problem
The oven does not
heat up.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on
the front frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Before you replace the lamp:
Step 1
Turn the glass cover to remove it.
Clean the glass cover.
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Install the glass cover.
Check if...
The fuse is blown.
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
Step 2
Disconnect the oven from
the mains.
Problem
The door gasket is
damaged.
The display shows
"12.00".
The lamp does not
work.
.........................................
.........................................
Step 3
Put a cloth on the bottom of
the cavity.
Check if...
Do not use the
oven. Contact an
Authorised Service
Centre.
There was a power
cut. Set the time of
day.
The lamp is burnt
out.