AEG BEB231011M User Manual page 18

18 www.aeg.com
Accessories
12.2 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1
Step 2
Step 3
Step 4
12.3 How to remove and install: Door
The oven door has two glass panels. You can remove the oven door and the internal
glass panel to clean it. Read the whole "Removing and installing door" instruction
before you remove the glass panels.
CAUTION!
Do not use the oven without the glass panels.
Step 1
Step 2
Clean all accessories after each use and let them dry. Use a soft cloth
with warm water and a mild detergent. Do not clean the accessories in a
dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-
edged objects.
Turn off the oven and wait un‐
til it is cold.
Pull the front of the shelf sup‐
port away from the side wall.
Pull the rear end of the shelf
support away from the side
wall and remove it.
Install the shelf supports in
the opposite sequence.
Open the door fully and hold both
hinges.
Lift and turn the levers fully on both
hinges.
2
1