Mounting The Cover Switch Housing; Maintenance; Blade Cleaning - Fanimation Treventi FP2500 Series Owner's Manual

1. Position the Cover Switch Housing over the Switch
Cup Housing.
2. Thread the two Cover Screws into the threaded posts
located in the Switch Cup Housing.
3. With a Philips screwdriver, tighten screws to secure the
Cover Switch Housing. (Figure 17)
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the fi nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to fi nish.
Periodic light dusting of the Palm Leaf, Woven Bamboo,
Wicker, and Wooden blades is recommended. A feather
duster will work best.

Mounting the Cover Switch Housing

Maintenance

Blade Cleaning

Switch Cup
Housing
Cover Switch
Housing
Cover Screws
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
11
Figure 17
CAUTION