Post-Processing - Flashforge Foto 13.3 Quick Start Manual

2. Small models are cleaned in an
ultrasound device filled with alcohol,
while the large models are rinsed in
a drum with alcohol.
4. After filtering the resin, pour it into
the resin recycling bottle (separate
packing of the new resin is
recommended).

Post-processing

1. When the printing is finished, a notification will
be displayed.Click [OK], open the light shield,
take out the build plate, drain the remaining
resin, and shovel the model off with a scraper.
Note: There will be uncured resin on the model
when printing is just finished. Please note
that the model must be dried before being
processed.
3. After cleaning, dry the model with a
dust-free cloth or with an air gun. Put it
in the curing box to solidify it again.
5. Clean the device with dust-free cloth and
alcohol. Turn off the device.
Note:
1) Take extra care when installing and
uninstalling the platform, for it's heavy
and might damage LCD screen if were to fall.
2) In the cases of long printing process, regular
observations are required. Stop printing
when flawed or fallen models appear.
3) Keep the environment clean and dust-free.
4) For novice to do the leveling, please reconfirm
the installation and leveling gaps.
14