Advertisement
Micom Function
Models: LSXS26336*
2. Function description
2-1. Funnction of Temperature Selection
Power
Notch
Initiallly On
Freezer
Refrigeration
1. The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target
temperature, not actual temperature within refrigerator.
2. Refrigeration function is weak in the initial time. Please adjust temperature as above after using refrigerator for minimum
2~3 days.
2-2. Automatic ice maker
The automatic icemaker can automatically makes 120~ 220 cubes per day. This quantity may vary by usage condition, including
ambient temperature, door opening, freezer load, and etc.
Icemaker stops making ice when the ice storage bin is full.
If you don't want to have the automatic icemaker make ices, press and hold ICE ON/OFF button until the indicator lights on. If you
want to have icemaker makes ices again, press and hold ICE ON/OFF button until the indicator lights off.
While ICE OFF indicator is on, Icemaker stops making ice. But you can dispense the ices until the ices run out from the ice
storage.Micom Function
2-3. When ice is not dispensed smoothly
Ice is lumped together
• When ice is lumped together, take the ice lumps out of the ice storage bin, break them into small pieces, and then place them into
the ice storage bin again.
•
When the ice dispenser produces too small or lumped together ice, the amount of water supplied to the ice dispenser need to be
adjusted. Contact the service center.
• If ice is not used frequently, it may lump together.
Power failure
Ice may drop into the freezer compartment. Take the ice storage bin out and discard all the ice then dry it and place it back. After the
machine is powered again, the previous selection mode remains.
The unit is newly installed
It takes about 12 hours for a newly installed refrigerator to make ice in the freezer compartment.
2-4. Ice Plus
1. Ice Plus is function to improve cooling speed of the freezing room by consecutively operating compressors and freezing room
fan.
2. Ice Plus is released if power failure occurs and then returns to the original status.
3. Temperature setting is not changed even if selecting the Ice Plus.
4. The change of temperature setting at the freezing room or the cold storage room is allowed with Ice Plus selected and processed.
5. The cold storage room operates the status currently set with Ice Plus selected and processed.
6. If selecting the Ice Plus, the Ice Plus function is released after continuously operating compressor and freezing room fan.
7. If frost removal starting time is arrived during Ice Plus, Ice Plus operation is done only for the remaining time after completion of
frost removal when the Ice Plus operation time passes 90 minutes. If passing 90 minutes, Ice Plus operation is done only for 2 hours
after completion of frost removal.
8. If pressing Ice Plus button during frost removal, the Ice Plus LED is turned on but if pressing the Ice Plus, compressor operates
after the remaining time has passed.
9. If selection Ice Plus within 7 minutes (delay for 7 minutes of compressor) after the compressor stops, compressor operates after
the remaining time has passed.
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
Advertisement
