Installing The Lower Housing Light Kit Assembly - Fanimation Kubix FP4420 Series Owner's Manual

Installing the Lower Housing Light Kit Assembly

CAUTION
To avoid possible electrical shock, be sure electricity is
turned off before installing downlight assembly.
1. Loosen three screws and remove one screw from
support flange. (Figure 1).
2. Securely attach the Lower Housing Assembly to the
Support bracket and tightening four screws. (Figure 2)
3. Securely attach plugs from motor to sockets on Downlight
Support Plate Assembly (Figure 3)
4. Securely attach Downlight Support Plate Assembly to
the Lower Housing Assembly with four screws provided.
(Figure 4)
10
Figure 1
Figure 2
Figure 3
Figure 4