Advertisement
Weight stack label instructions
.
1 Wipe front surface of weight stack
.
2 Peel off back sheet adhesive side from label and make sure
that the label remains attached to the application tape
.
3 Aline the center hole of label with the weight stack
.
4 Line up the first label to hole on top plate
.
5 Make sure label is straight and slowly press into place
.
6 Gently remove application tape and rub each label firmly against
the weight stack
.
7 Allow labels to stand for 24 hours to allow adhesive to cure fully
(
.
.
)
.
.
.
center hole
.
.
Advertisement
