Advertisement
Available languages
Available languages
Use
Weight measurement only
1. Operate the scale on a secure flat floor.
2. Choose pounds (lb) or kilograms (kg) by switching the convertible switch
on rear of scale. When scale is on, the user can select desired unit of
measurement.
3. Tap the scale in standby mode. The whole screen appears.
4. Wait until all digits light for 2 seconds and "0.00" appears.
5. Step on the scale and stand still to measure your weight. Display flashes
and then shows weight.
6. Step off the scale and it will shut off automatically.
Personal Data Setting Mode
If at any time during the personal data entry process a button is not pressed
within 10 seconds, the scale will automatically switch off. When the scale is
switched off, quickly and firmly tap the center of the scale platform with foot to
activate digital display.
Set User ID
1. Wait for "0.00" to show, then press the SET button.
2. "P-1" will now flash in the display window.
3. Press UP or DOWN arrow buttons to scroll to your desired user number (8
user numbers available: P-1 through to P-8).
4. When selected user number appears in display, press SET button to save
user number.
Set Height
1. Cm or inch symbol will flash in the display window.
2. Press UP or DOWN arrow buttons to scroll to your height measurement.
3. When selected height appears in display window, press SET button to
save height.
Set Age
1. Age symbol will now flash in the display window.
2. Press UP or DOWN arrow buttons to scroll to your age.
3. When selected age appears in display window, press SET button to save
age.
Set Gender/Activity Mode
1. Press SET button. Default gender icon will flash. Press the UP or DOWN
button to choose between female, male, female athlete, and male athle-
te modes. In order to choose the male/female athlete setting, press SET
when both the correct gender icon and the running person icon lights up.
2. Press SET button to confirm selection. The scale will display the user
data for a few seconds and then will enter body analysis mode and "0.00"
will appear on the display.
EN
2
Advertisement
