Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt DW743N Original Instructions Manual

FLIP-OVER SAW DW743N
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional power tool users.

Technical Data

Voltage
(UK & Ireland only)
Type
Power input
230 V tools
115–120 V tools
No-load speed
Blade diameter
Blade bore
Blade body thickness
Blade tooth thickness
Riving knife thickness
Mitre (max. positions)
Bevel (max. positions)
Automatic blade brake time
Weight
Cutting capacities
Mitre saw mode (fig. b)
Cutting angle
Straight cross-cut
Table turned 45° right for mitre cuts
Table turned 45° left for mitre cuts
Sawhead tilted 45° left for bevel cuts
Bench Saw mode
Max. ripping capacity left/right
Depth of cut at 90°
Depth of cut at 45°
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029-1
and EN 61029-2-11.
Vibration emission value a
h
a =
h
Uncertainty K =
WALT one of the most
E
DW743N DW743N DW743N
QS/GB LX DK
V 230 – 230
V 230/115 115 230/115
2 2
W 2,000 2,000 2,000
W 1,700 1,700 1,700
min -1 2,850 2,850 2,850
mm 250 250 250
mm 30 30
mm 2.2 2.2 2.2
mm 3 3
mm 2.3 2.3 2.3
left 45° 45° 45°
right 45° 45° 45°
left 45° 45° 45°
s < 10 < 10 < 10
kg 37 37
Size of material Notes
H mm B mm
Workpiece
place against
fence (X)
20 180 No packaging
piece required
30 176
40 170
68 140
85 26 Cross-cut at
max. height
70 95
20 130
50 140
mm 210/210 210/210 210/210
mm 0–70 0–70 0–70
mm 0–32 0–32 0–32
dB(A) 93 93
dB(A) 3 3
dB(A) 106 106 106
dB(A) 2.9 2.9 2.9
m/s² 2.0 2.0
m/s² 1.5 1.5
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
3
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
30
Fuses:
Europe
3
U.K. & Ireland
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply
system with maximum permissible system impedance Zmax of 0.30 Ω
at the interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power
37
system which fulfils the requirement above. If necessary, the user can
ask the public power supply company for the system impedance at the
interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
93
3
DW743N
D WALT declares that these products described under "technical data"
E
are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive 2004/108/EC. For more
information, please contact D
the back of the manual.
2.0
The undersigned is responsible for compilation of the technical file and
1.5
makes this declaration on behalf of D
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
WALT at the following address or refer to
E
WALT.
E
E NG L I S H
31