Technical Data - DeWalt DWC410 Original Instructions Manual

EngLIsh
WET TILE CUTTER
DWC410
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland only
Type
Power input
No load speed
Wheel diameter
Cutting depth at 90˚
Maximum permissible water pressure
Weight
Noise values and vibration values (triax vector sum) according to EN60745:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
nOtE: This device is intended for the connection to a power
supply system with maximum permissible system impedance
18
Zmax of 0.367 Ω at the interface point (power service box) of
user's supply.
The user has to ensure that this device is connected only to a
WALT one of the
e
power system which fulfils the requirement above. If necessary,
the user can ask the public power supply company for the
system impedance at the interface point.
EC-Declaration of Conformity
DWC410
V 230
Machinery Directive
AC
V 115/230
AC
1
W 1300
Wet Tile Cutter
min -1 14,500
DWC410
mm 110
D
mm 34
Technical Data are in compliance with:
bar 6
2006/42/EC, EN60745-1:2009 +A11:2010,
kg 3.0
EN60745-2-22:2011 +A11:2013.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
dB(A) 102.5
the following address or refer to the back of the manual.
dB(A) 113.5
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
dB(A) 3.0
m/s 2 4.1
m/s 2 1.5
Markus Rompel
Director Engineering
D
65510, Idstein, Germany
29.03.2018
D
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60745-1:2009 +A11:2010, EN60745-2-22:2011 +A11:2013.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
WALT declares that these products described under
e
WALT, Richard-Klinger-Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Wet Tile Cutter
DWC410
WALT declares that these products described under
e
WALT at
e
WALT.
e