DeWalt DW745 User Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Saw
  5. DW745
  6. User manual

DeWalt DW745 User Manual

Hide thumbs Also See for DW745:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , Manual
DW745
www.
.eu

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DW745

Summary of Contents for DeWalt DW745

  • Page 1 DW745 www.
  • Page 3 28 29 30...
  • Page 4 19 40...

  • Page 5: Defi Nitions: Safety Guidelines

    E N G L I S H TABLE SAW DW745 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough product MACHINERY DIRECTIVE development and innovation make D WALT one of the most reliable partners for professional power tool users.
  • Page 6 E N G L I S H 9 Secure workpiece • Never operate the saw without the upper and lower guards in place. Use clamps or a vice to hold the workpiece. It is safer and it frees • Keep your hands out of the path of the saw blade. both hands to operate the tool.

  • Page 7: Markings On Tool

    19 Mitre fence Wear respiratory protection. INTENDED USE Your DW745 jobsite table saw has been designed to perform the sawing Pull the plug from the socket when blade change or any operation of ripping, cross-cutting, bevelling and mitring in wood, wood maintenance is needed.

  • Page 8: Using An Extension Cable

    The plug should be fitted by a competent person. If you are in doubt, Blade height adjustment (fi g. A1) contact an authorized DEWalt repair agent or qualifued electrician. The blade can be raised and lowered by turning the combined elevating The plug fitted should be comply with BS EN 60309 (BS4343), 16Amps, and bevel control wheel (11).

  • Page 9: Operation

    E N G L I S H Mounting and adjusting the parallel fence (fi g. A1, F1 & F2) • Ensure the machine is placed to satisfy ergonomic conditions The rip fence (8) can be installed on the left or right side of your table in terms of table height and stability.

  • Page 10: Maintenance

    E N G L I S H • After completing the cut, switch the machine off, allow the blade to SAW BLADES: ALWAYS USE 250 mm noise reduced saw blades 30 mm arbour holes. Blade speed rating must be al least 4000 RPM. Never use a stop and remove the workpiece.

  • Page 11: Protecting The Environment

    E N G L I S H GUARANTEE Keep the ventilation slots clear and regularly clean the housing with a soft cloth. Regularly clean the dust collection system (fi g. L): • Turn the saw on its side. WALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the •...

Table of Contents