Extreme Networks PoS Installation And User Manual page 59

Basic PoS Module Configuration Information
Configuration Commands for APS: Switch Redundancy
The following configuration commands apply to the PoS module installed in slot 8 of
BlackDiamond switch 1, as shown in Figure 3-5.
create vlan apsvlan
config apsvlan add port 6:1
config apsvlan ipaddress 192.168.1.1 /30
enable loopback-mode apsvlan
enable ipforwarding
create aps 1
configure aps 1 add 8:1 working
enable aps
The following configuration commands apply to the PoS module installed in slot 3 of
BlackDiamond switch 3, as shown in Figure 3-5.
create vlan apsvlan
configure apsvlan add port 6:1
configure apsvlan ipaddress 192.168.1.2 /30
enable ipforwarding
create aps 1
configure aps 1 add 3:2 protection 192.168.1.1
enable aps
Packet Over SONET Module Installation and User Guide 3-11