Inserting And Securing A Pos Module - Extreme Networks PoS Installation And User Manual

Installing or Replacing a PoS Module
(a) Loosen
captive screws
(b) Pivot
ejector/injector
handles
Figure 2-2: Inserting and securing a PoS module
When the module is pushed into the chassis slot, the ejector/injector handles
will begin pivoting to their closed position.
e To seat the module in the backplane connectors, completely close the module
ejector/injector handles by pushing them toward the center of the module front
panel.
2-8
1 2 3 4 A
50015
POWER
50020
B 5 6 7
50015
POWER
DC OUT
AC IN
Packet Over SONET Module Installation and User Guide
8
DC OUT
AC IN
50020
PoS_004