Extreme Networks PoS Installation And User Manual page 151

Packet over sonet module
Table of Contents

Advertisement

Table 3-18: Changes to Port Commands
Command
disable jumbo-frame ports [<portlist> | all]
disable ports <portlist>
enable jumbo-frame ports [<portlist> | all]
enable ports <portlist>
restart ports <portlist>
show ports {<portlist>} info {detail}
show ports {<portlist>} qosmonitor {egress |
ingress} {discards}
show ports {<portlist>} rxerrors
Packet Over SONET Module Installation and User Guide
Additional PoS Module Support Topics
Description of Change
Augmented implementation: This command
applies to PoS ports when disabling jumbo-frame
support changes the negotiated maximum
receive unit (MRU) size.
Augmented implementation: For PoS modules,
this command brings down the PPP link on the
specified port, and changes the port status LED
to blinking green.
Augmented implementation: This command
applies to PoS ports when enabling jumbo-frame
support changes the negotiated maximum
receive unit (MRU) size.
Augmented implementation: For PoS modules,
this command enables the PPP link on the
specified port, and changes the port status LED
to solid green (if no other problems exist).
Augmented implementation: For PoS modules,
this command causes the PPP link to be
renegotiated.
Augmented implementation: The information
displayed by this command includes DiffServ and
RED configuration parameters for the PoS
module ports.
Enhanced command: The optional egress,
ingress, and discards keywords display
information for PoS ports.
By default, the command displays transmissions
in the egress direction. The ingress keyword
causes the command to monitor and display
queue statistics for the ingress direction. The
discard keyword causes the command to monitor
and display packet discard statistics rather than
transmission statistics. Currently, the egress,
ingress, and discard keywords apply only to PoS
ports.
Augmented implementation: Only a subset of
the statistics displayed by this command are
applicable to PoS ports. The fields that do not
apply to PoS ports are displayed with values of
all zeroes.
3-103

Advertisement

Table of Contents
loading

Table of Contents