Extreme Networks PoS Installation And User Manual page 158

Table A-1: New ExtremeWare Commands (continued)
Command
config sonet threshold signal degrade
<error_rate> ports <portlist>
config sonet threshold signal fail <error_rate>
ports <portlist>
config sonet trace path <id_string>
ports <portlist>
config sonet trace section [<id_byte> |
string <id_string>] ports <portlist>
create aps <group#>
delete aps <group#>
disable aps
disable flowstats filter <filter#>
ports <portlist> [ingress | egress]
disable flowstats ping-check {<group#>}
disable flowstats ports <portlist>
enable aps
enable flowstats filter <filter#> ports <portlist>
[ingress | egress]
enable flowstats ping-check {<group#>}
enable flowstats ports <portlist>
show aps {<group#>} {detail}
show flowstats {<portlist> | export {<group#>}
{detail}}
show ppp {<portlist>} {detail}
show sonet {<portlist>} {detail}
unconfig aps <group#>
unconfig diffserv dscp-mapping
ports <portlist>
A-4
Description
Configures the Signal Degrade threshold for the
specified SONET ports.
Configures the Signal Failure threshold for the
specified SONET ports.
Configures the Path Trace Identifier string for the
specified SONET ports.
Configures the Section Trace Identifier for the
specified SONET ports.
Creates an APS group with the specified group
number.
Deletes the specified APS group.
Disables the APS function for an entire switch.
Disables a specified flow record filter for the
specified SONET ports.
Disables the flow statistics ping-check function for
a specified group of collector devices.
Disables the flow statistics function on the
specified SONET ports.
Enables the APS function for an entire switch.
Enables a specified flow record filter for the
specified SONET ports.
Enables the flow statistics ping-check function for
a specified group of collector devices.
Enables the flow statistics function on the
specified SONET ports.
Displays APS group status information.
Displays status information for the flow statistics
function.
Displays status information for PPP ports.
Displays SONET port status.
Resets the APS group configuration parameters
to their default values.
Resets the DSCP mapping tables for the
specified PoS ports to their default values.
Packet Over SONET Module Installation and User Guide