Table of Contents
Advertisement
Configuring the PoS Module
Configuring the MPLS tls-Tunnel
The following configuration commands create an MPLS tls-tunnel between
BlackDiamond switch 1 and BlackDiamond switch 2, as shown in Figure 3-20.
config mpls add vlan mplsCloud
config mpls add tls-tunnel BD2 10.1.1.2 customerX tls-labels 8F100 8F200
enable mpls
The following configuration commands create an MPLS tls-tunnel between
BlackDiamond switch 2 and BlackDiamond switch 1, as shown in Figure 3-20.
config mpls add vlan mplsCloud
config mpls add tls-tunnel BD1 10.1.1.1 customerX tls-labels 8F200 8F100
enable mpls
For more information about MPLS and MPLS commands, see the MPLS
Installation and User Guide.
3-100
Packet Over SONET Module Installation and User Guide
Advertisement
Table of Contents
